Junger-audio D*AP8 Digital Audio Processor Uživatelský manuál stáhnout pdf (Strana 28)

D*AP8

Important note! The AES relay bypass circuit of the AES I/Os may be deactivated inside the

D*AP8. You must open the cover plate from the D*AP8 unit and locate the red jumpers shown in the

schematic below:

You must remove the jumper to de-activate the respective AES I/O relay power fail circuit.

Setup GUI – INTERFACES – SDI I/O interface – Overview

If the D*AP8 is equipped with an optional SDI interface the following settings will be available.

This pane has five sub panes imbedded:

The overview pane shows all relevant information of that interface:

SDI Status [Locked / Unlocked]

Video Format [SD / HD /3G / N/A]

Video Standard [actual decoded standard (e.g. 1080i50) / No SDI Lock]

Audio De-Embedder [PCM / Dolby E / Dolby Digital / Dolby Digital Plus / MPEG-4 HE AAC /

Status MPEG-4 AAC / N/A]

VANC Metadata The respective soft LED will turn green to indicate the SDID found in the stream

De-Embedder Status while the angle brackets indicate the SDID one has selected in the de-embedder

set-up as a pre-selected stream.

Audio Embedder [AUTO – Embedding / AUTO – Replace Audio / OFF / Delete]

Status

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 99 100

Žádné komentáře

Junger-audio D*AP8 Digital Audio Processor Uživatelský manuál Strana 28